SHR-3000L high speed plastic PVC powder mixing machine with
electric heating
Application:
It is used in the process of compounding, mixing, drying and
coloring of various plastics. It is the most ideal equipment for
profile and pipe manufacturers.
Features:
The concave and convex double-channel sealing method is adopted
between the container cover and the container, and the sealing
effect is better than the conventional single-channel flat sealing.
The main shaft seal is made of three-layer skeleton oil seal made
of imported durable rubber, and has oil filling device, which has
good sealing effect and long service life.
The discharge valve is plugged with a plunger type. The inner
surface of the door block is closely matched with the inner wall of
the container, and there is no dead zone of the mixture, so that
the materials are evenly mixed. The door plug is sealed by end face
and the seal is reliable. The temperature measurement point is set
in the container, and it is in direct contact with the material,
and the temperature measurement is accurate.
The cold machine blades use large angled blades to force the
material to rise along the inner wall of the container and return
to the cooling jacket for cooling purposes.
The wall of the vessel is provided with a cooling interlayer, and
the cooling interlayer is provided with a spiral water passage to
allow the cooling water to flow according to a set route. Cool
evenly, fast cooling and good cooling effect. The container has an
inverted truncated cone-shaped inner cooling jacket, which
increases the cooling area and speeds up the cooling.
The cold machine introduces the foreign deceleration technology and
adopts the direct deceleration device, which overcomes all the
disadvantages of using the reducer and makes the operation more
stable. An exhaust device is arranged on the cover of the cold
machine to fully eliminate the gas generated by the hot mix during
the cooling process, thereby improving the quality of the product.
The electrical control system is temperature and time dual control,
and other components are made of well-known enterprise products to
make their performance reliable and more sensitive, ensuring the
performance of the whole machine.
According to the characteristics of the material, the stainless
steel blade has two kinds of disc blades and three blades. The
agitating paddle is driven by a motor through a triangular tape. It
rotates clockwise to make the material move along the wall of the
pot on the one hand, and simultaneously circulates up and down,
processing the baffle to make the mixing effect better. Since the
material is moving at a high speed, the friction between the
material and the blade is very high, which causes the temperature
of the material to rise rapidly, which not only reduces the heating
amount of the wall, but also favors the resin to the plasticizer.
Absorption, the mixing slurry is made of stainless steel, carefully
machined, wear-resistant, corrosion-resistant.
Details specification pictures mixer:
Technical date:
| Model | Total volume | Available capacity | Motor power | Shaft speed | Heating method |
| SHR-5A | 5L | 3L | 1.1Kw | 1400rpm | Self friction/electric |
| SHR-10A | 10L | 7L | 3Kw | 2000rpm |
| SHR-25A | 25L | 20L | 5.5Kw | 1440rpm |
| SHR-50A | 50L | 35L | 7/11Kw | 750/1500rpm |
| SHR-100A | 100L | 75L | 14/22Kw | 650/1300rpm |
| SHR-200A | 200L | 150L | 30/42Kw | 475/950rpm |
| SHR-300A | 300L | 225L | 40/55Kw | 475/950rpm |
| SHR-500A | 500L | 375L | 47/67Kw | 430/860rpm |
| SHR-800A | 800L | 600L | 60/90Kw | 370/740rpm |
| SHR-1000A | 1000L | 750L | 83/110Kw | 350/700rpm |
BEISU Machinery:
BEISU machinery and equipment recommendation: PVC/PE/PP pipe
production line, PVC/PE wood plastic production line, PVC
profile/profile production line, PVC/PP/PE/ABS sheet/sheet
production line, PVC edge band production line and mill, High-speed
mixer (group), crusher, sharpener, shredder, tractor, winder,
cutting machine and other plastic auxiliary machinery.
Why choose BEISU Machinery:
A1: Plant construction, renovation plan, pipeline laying plan in
the plant, construction plan of circulating cooling pool
A2: Supply of raw materials, transformers, air compressors and
other procurement plans
A3: Provide relevant raw material specific formula, high quality
raw material suppliers, raw material cost accounting
A4: Installation equipment, commissioning equipment, training
staff, and provide technical support throughout the year
A5: BEISU company has a plastics industry engineering alliance
nationwide, in the case of distance, can provide relevant talents
in your company year-round work, as a technology backing
